| 价格 | RM10.00 |
| 发货 | AsiaChina付款后24小时内 |
| 数量 | -+ |
| 库存 | 100件起订1件 |
● Open hinge.
● Stiff 0.5" Flush Grid design.
● 70% open contact area; largest opening 5x3.3 mm (0.2"x0.13").
● Contact Path Conveyor for precise belt measurements and stock status before designing equipment or ordering a belt.
Belt data | ||||
Belt material | Rod material | Nominal tensile strength straight run N/M (21°C) | Belt weight kg/m² | Standard range of belt widths mm |
POM | PP | 16000 | 7.80 | 50*n |
PA | 18000 | 8.10 | ||
PP | PP | 11000 | 5.40 | |
PE | PE | 7000 | 5.70 | |
Remark:
Real Conveyor Modular Belts widths are in most cases 0.1% to 0.3% smaller.
For PP material up to 750 mm (30") -3 mm to 0 mm and -0.4% to 0% for wider belts.
For POM material up to 750 mm (30") -3 mm to 0 mm and -0.4% to 0% for wider belts.
For PE material up to 750 mm (30") -3 mm to 0 mm and -0.4% to 0% for wider belts.
The nominal tensile strength is valid for 21 °C. The admissible tensile force depends on the operating temperature near the drive sprockets. Within the temperature range allowed, the admissible tensile force may vary from 100% to 20% of the nominal tensile strength.
