The machine can store a maximum of 100 design. The basic memory size is 2 million stitch. You can turn the from 0 degree # to 359 degree in the increments of 1 degree and also reverse the design in the X direction (mirror image). You can reduce or enlarge the embroidery design in size from 50% to 200% by 1% along the X and Y axis. You can select the order of the needle bars up to the 99th. The same design can be repeated up to 99 times along the X and Y axis. Several designs can be repeated up to 63 times at different angles and directions. The frame automatically returns to the offset point when the embroidery is finished to make it easier fo you to switch the frames. You can select AUTOMATIC OFFSET at PARAMETER SELECT MODE to move the frame automatically to the desired point, making it easier to do appliques and to switch the frames. You can manually move the frame to the pre-selected point to do appliques or change the frames during embroidery work. The frame can be moved back to its original place by simply pressing the right buttons. The frame can be moved back to the start point of the design during the embroidery work. The frame and the needle bar can move back and forth by the units of 1, 100, 1000 and 10000 stitches and by color without stitching. When the thread breaks or runs out of track, you can move the needle bar back to the starting point of the design in the units of one to ten stitches.
