The XTENDEX® HDMI Over IP Extender multicasts digital video and audio signals to one or more receivers up to 333 feet away using CAT5e/6/7 cable.
Each HDMI Over IP Extender consists of a local unit that connects to an HDMI source, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection, or through VLAN isolation on a managed network switch for a Point-to-Many connection.
- Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200.
- Ideal solution for digital signage applications.
- Broadcast real-time HDMI video/audio to multiple display locations.
- Transmits an HDMI signal over one CAT5e/6/7 cable.
- Plug-and-Play installation allows receivers to find the transmitter automatically on the same network. (Network configuration may be required for Managed network switch.)
- Built in default EDID configuration table.
- Easily expandable. Add remote units as you add monitors.
- Inexpensive CAT5e/6/7 cable replaces bulky video cables.
- Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support one transmitter.
- The managed switch must support port based IEEE 802.1Q VLAN, IGMP, and permit duplicate IP addresses across the VLAN domains.
- Each VLAN acts as a separate HDMI Over IP Channel on the network.
- Cascade managed switches up to 3 levels, allowing the farthest display to be located up to 1,000 feet away from the source device. Each receiver can be located up to 333 feet from the managed switch.
- Use a PC to access the built-in HTTP Interface of the managed network switch to control what signal is being watched at each location.
- Built-in scaler function allows different input and output resolutions without having to lower the quality of the HDMI source.
- Internal JPEG video compression adapts to available bandwidth if needed.
- HDCP compliant.
- Compliant with HDMI 1.3 standard.
- Full IR control of HDMI source from remote HDTV extension in Point-to-Point connections.
