Welding Equipment & Supply in Malaysia | E-searching Welding Equipment & Supply Products-Taurus 505 Synergic S TDM

Inverter welding machine, DC
Multiprocess: MIG/MAG, TIG lift arc, MMA, air arc gouging
Modular (gas- or water-cooled)
Gouging with carbon electrode diameters of up to 10mm (505)
Very high power reserves enable use of long intermediate hose packages:
Synergic S: One-knob operation – easy setting of operating point, setting of all welding parameters and functions, and display of the welding parameters on the wire feed unit, pre-programmed JOBs (welding tasks)
More effective welding with forceArc and rootArc technology
Tool-free polarity selection: ideal for welding self-shielding flux cored wires
Protective earth monitoring (PE)
Cooling unit can be changed with no need for tools or specialist staff and no need to open the welding machine
Connection capability for remote control and function torch
Trolley and cooling unit optionally available

forceArc –Low-heat, directionally stable and powerful arc with deep penetration for the upper power range

rootArc –Short arc with good modelling properties for easy gap-bridging and positional welding

	Taurus 505 Synergic S TDM
	MIG/MAG		TIG		MMA
Setting range for welding current	5 A - 500 A		5 A - 500 A		5 A - 500 A
Duty cycle at ambient temperature	25 °C	40 °C	25 °C	40 °C	25 °C	40 °C
60 %	–	500 A	–	500 A	–	500 A
65 %	500 A	–	500 A	–	500 A	–
100 %	460 A	430 A	460 A	430 A	460 A	430 A
Open circuit voltage	80 V
Mains frequency	50 Hz / 60 Hz
Max. connected load	24.6 kVA		18.9 kVA		25.3 kVA
Recommended generator power	35 kVA
Drive rollers	4
Wire speed	0.5 m/min - 24 m/min
Dimensions, machine, LxWxH in mm	624 x 298 x 535
Wire feeder LxWxH in mm	690 x 300 x 410
Weight, machine	45 kg
Weight, wire feeder	15.1 kg
Weight, cooling unit	16.5 kg
Protection classification	IP 23
Insulation class	H
Torch connection	Euro torch connector
Cooling output	1000 W (1l/min)
Tank capacity	4 l
Flow rate	5 l/min
Max. output pressure	3.5 bar
Standards	IEC 60 974-1; -10 / CE / S-Safety sign / EMC class A

Selection of the welding task from the JOB list
Setting of all welding parameters and welding data displays on the wire feed unit or on compact welding machine
Setting of the welding parameters via welding sequence with LED user menu
Synergic – one-knob operation
No settings required on decompact welding machine
Highlights
Easiest possible selection of the preset JOBs (welding tasks) for the different materials, gas types and wire diameters via JOB list
Synergic – one-knob operation
forceArc, rootArc and standard MIG/MAG welding with solid and flux cored wire, MMA and TIG lift arc welding, air arc gouging
Extensive remote control options

Price	Negotiable
Delivery	MalaysiaSelangorSeri Kembangan
	Insufficient stock for this product

Taurus 505 Synergic S TDM