Welding Equipment & Supply in Malaysia | E-searching Welding Equipment & Supply Products-Taurus 501 Basic FKW

Inverter welding machine, DC, water-cooled
Multiprocess: MIG/MAG, MMA and air arc gouging
Basic: Twin-knob operation – setting of the welding voltage and wire-feed speed at the wire feed unit
Tool-free polarity selection: ideal for welding self-shielding flux cored wires
Protective earth monitoring (PE)
4-roll drive. Equipped for 1.0 mm + 1.2 mm steel wires
Powerful cooling system with centrifugal pump, pressure switch and large 12 l tank. Temperature-controlled pump and fan
Connection capability for remote control
5 m mains supply lead
Available as multi-voltage version (230 V, 400 V, 480 V) as option

Taurus 501 Basic FKW
	MIG/MAG		TIG		MMA
Setting range for welding current	5 A - 500 A		5 A - 500 A		5 A - 500 A
Duty cycle at ambient temperature	25 °C	40 °C	25 °C	40 °C	25 °C	40 °C
60 %	–	500 A	–	500 A	–	500 A
65 %	500 A	–	500 A	–	500 A	–
100 %	460 A	430 A	460 A	430 A	460 A	430 A
Open circuit voltage	80 V
Mains frequency	50 Hz / 60 Hz
Mains fuses (slow-blow)	3 x 35 A
Mains voltage (tolerances)	3 x 400 V (-25 % - +20 %)
Max. connected load	24.6 kVA		18.9 kVA		25.3 kVA
Recommended generator power	35 kVA
Drive rolls	4
Wire speed	0.5 m/min - 24 m/min
Dimensions, machine, LxWxH in mm	1100 x 455 x 1000
Weight, machine	118 kg
Protection classification	IP 23
Insulation class	H
Torch connection	Euro torch connector
Cooling output	1500 W (1l/min)
Tank capacity	12 l
Flow rate	5 l/min
Max. output pressure	3.5 bar
Standards	IEC 60 974-1; -5; -10 / CE / S-Safety sign / EMC class A

No electronics in the wire feeder
Setting of operating point, wire speed and non-latched/latched on the wire feeder
Twin-knob operation
Setting of all welding parameters and welding data displays on the welding machine
Highlights
MIG/MAG welding with solid and flux cored wire, MMA welding, air arc gouging

Price	Negotiable
Delivery	MalaysiaSelangorSeri Kembangan
	Insufficient stock for this product

Taurus 501 Basic FKW