| 价格 | 面议 |
| 发货 | MalaysiaSelangorKlang付款后3天内 |
| 该产品库存不足 |
|
||||||||||||
|
Application:  The TPAK Series coolant pump is design for the circulation and spraying of cooling lubricants, especially for machine tools. This series may use on all machine tools performing Turning, Milling, Drilling, Cutting, Slitting, Grinding etc. operation. It is suitable to carry liquids such as water, coolant, light oil and other clean, non aggressive matters. |
Pump Construction:
The pump is one-chamber vertical centrifugal pump, co-axial pump/motor design, impellers mounted on extended motor shaft.
Motor:
Enclosure protection class: IP54
Insulation class: F.
Frequency range: 50/60Hz
Nominal speed: 2900 / 3500 rpm
Standard voltages: 3Ø 50Hz:200-255V / 380-440V
3Ø 60Hz:200-255V / 380-480V
Operation Conditions :
1.Ambient temperature: Max. +40¢XC
2.Liquid temperature range: +0¢XC ~ +90¢XC
3.Operating pressure: Max. 10kg/cm²
Dimensions:
Model Code:
TPAK Series
| Model |
PH |
Cycle |
Input Power (W) |
Volts (V) |
Full load current (A) |
|---|---|---|---|---|---|
|
TPAK 2
|
|||||
|
3
|
50
|
270
|
200-255 / 380-440
|
1.0-1.3 / 0.6-0.8
|
|
|
60
|
350
|
200-255 / 380-480
|
1.2 / 0.7
|
||
|
TPAK 4
|
3
|
50
|
440
|
200-255 / 380-440
|
1.5-1.9 / 0.9-1.2
|
|
60
|
620
|
200-255 / 380-480
|
2.0 / 1.1
|
||
|
TPAK 8
|
3
|
50
|
930
|
200-255 / 380-440
|
3.1-4.4 / 1.9-2.6
|
|
60
|
1320
|
200-255 / 380-480
|
4.0 / 2.4
|
||
|
TPAK 15
|
3
|
50
|
1300
|
220 / 380
|
4.8 / 2.8
|
|
60
|
2000
|
220 / 380
|
5.4 / 3.1
|
