Easyfoil 130FC

Easyfoil 130FC hot foil stamping machine is another new masterpiece launched by Masterwork for the field of double layout hot stamping of high-end mik boxes and food packaging. Paired with Ecocut130CS die-cutting with stripping machine, it forms an exquisite post-press solution for premium folding gift packaging. This machine has a hot stamping speed of 6,000 sheets/hour and a 1,300mm paper format. The pressure can reach 300 tons. lt is suitable for the production of single-layer paper of 90-2,000g/m2, bringing you higher production efficiency and lower production costs. At the same time, this equipment is equipped with the new MP2020 hot stamping control system, which has a non-stop pressure adjustment function. The operation interface is more friendly, the efficiency is higher, and it also provides more possibilities for accessing the modern production management system.

Product Features

Feeding Unit

Push-pull dual-purpose side lay, easy to switch between push and pull lay

Equipped with a deceleration mechanism, the paper reaches front lay more smoothly

High-speed clutch, the main unit can run separately. which is convenient for sampling and plate adjustment. shortens the adjustment time

Maintenance-free synchronous belt drive more stable

Ultrasonic double sheet detection (optional)

Manual paper pile lateral adjustment, operation simple and convenient

Becker vacuum pump

Foil stamping unit

Foil control computer system

Three shafts longitudinal foil feeding system

One shafts horizontal foil feeding system

External brush roller waste foil collection device

Holographic hot stamping control system (optional)

Optional longitudinal 6 shafts, transverse 2 shafts

The maximum foil diameter is 250mm

Transverse foil control unit

Transversal foil feeding, more stable

Waste foil collection in OS operation more convenient

Die-cutting Unit

Combined base plate with a fine-tuning function

Extended connecting rod to increase the pressure holding time

Bidirectional pneumatic locking device for chase and base plate

High quality main chain, patented front lay compensation mechanism, improve machine accuracy

20 independent temperature control zones , the temperature difference is ≤+5°

High quality intermittent box

Servo automatic pressure regulation mechanism

Delivery unit

Mechanical bidirectional paper alignment device

Pneumatic sampling device

Control system

New hot stamping control system has the function of non-stop pressure adjustment, the operation interface is more friendly

Equipped with high-end circuit safety module.reach level 4 safety protection

Mitsubishi PLC, the calculation and execution speed is faster, stable and reliable

Modular design for easy maintenance(control and safety protection)

Technical Parameter

Maximum sheet size    1300 x 960mm    

Minimum sheet size    550mmx450mm    

Maximum die cutting size    1300 x 945mm    

Maximum hot stamping size    1300 x 9740mm (machine running direction)    

Gripper margin    9~17mm    

Paper    Cardboard: 0.1-2mm (90-2000 gsm)
Corrugated: Max.4.0mm, flatness< 20mm/m2    

Max.operating pressure    300T    

Die cutting accuracy    ≦±0.10mm (die-cutting and hot stamping);
≦±0.20mm(optional holographic foil stamping)    

Max. working speed    6000s/h (optional holographic hot stamping: 5500s/h)    

Max. feeding pile height    1,300 mm(including wooden pallet)    

Max. delivery pile height    1,100mm(including wooden pallet)    

Electrical heating zone    20 zones (Individual adjustable from 40-180 ℃)    

Max. diameter of foil roll    Machine direction /Longitudinal direction: 250mmTransversal direction: 200mm    

Width of aluminum foil    20~1300mm    

Main motor power    15KW    

Overall weight    25T    

Overall dimensions (L x W x H)    7481mm x 5124mm (including operation platform) x 2480mm    

Air source requirements    Pressure 0.6~0.7 MPa, flow rate ≥0.8 m³/h