| 价格 | 面议 |
| 发货 | AsiaChina付款后3天内 |
| 该产品库存不足 |
Coating line features:
TZ1600-100 is a food-grade high-speed coating line with full sealing dust-free workshop. The products of this coating line apply to can ends & tabs. The pretreament process is different with other coating lines to meet the requirement of food-grade product. Expanding shaft loading system and waste gas treatment system is always recommended.
Application: For coating food grade aluminium and tinplate coils using for beverage can ends & tabs, Food can front ends & tabs, Food can bottom ends, PP caps, Closures, Aerosol can ends & components, Capacitors, etc.
Advantage:Food grade, high speed coating line, continuous production with loopers
Main parameters of coating line
Material parameter
Thickness: | 0.20～0.5mm |
Width: | 700～1650mm |
Outer diameter OD(max): | Φ2000mm |
Inner diameter: | Φ505mm |
Bobbin material: | Paper |
Inverval-layers deviation tolerance: | ≤0.5 mm (Excluding the bottom 5 layers and exterior 2 layers) |
Coil over-all deviation tolerance: | ≤2 mm (Excluding the bottom 5 layers and exterior 2 layers) |
Coating thickness: | Topside/back side dry film thickness: 5~13 g/㎡, total dry film thickness less than 13 g/㎡ |
Product Weight: | Max12000kg（Excluding bobbin） |
CCL Processing Speed: 40 m/min (Speed benchmark: thickness 0.3mm coil exclude PVDF coating)
Heating Energy Source: LNG, LPG
Roller coating Process: Continuous 2 sides 3 coating & 2 baking
Properties and features:
Roller width: | 1900 |
Coils feeding centering adjustment : | ±100mm |
Threading speed: | 5～15m/min（Adjustable） |
Line maximum speed: | 100m/min |
Line speed accuracy: | Steady Speed, ±0.1%; Acceleration, ±0.4% |
Uncoiling tension range: | 200～500kgf |
Processing tension range: | 300～850kgf |
Coiling tension range: | 500～1300kgf |
Tension accuracy: | Steady Speed, ±1.0%; Acceleration, ±2.0% |
Line space dimensions: | 140m*14.2m*9m |
Heating Energy Source: | LNG,LPG |
2.Basic Production Process
Coil loading → Uncoil machine → Convey device → Cutting device → Sewing table → Tension device 1 → entrance accumulator → CPC 1 → Tension device 2 → Pretreatment (Including Degreasing, Water washing, Neutralizing, Water washingdrying, Deionized water washing, Drying, CPC 2, Roller-coating chromizing, Drying) → CPC 3 → Tension device 3 → Topside / backside roller-coater → Curing oven → Air cooling → Water cooling roller →Tension device 4 → CPC 4 → Rear accumulator → Tension device 5 → 2 rollers convey device → Cutting device → Coil machine → Coil discharging
3.Main devices list
Name | Quantity |
Coil loading device | 2 |
Uncoil machine | 2 |
Coil loading platform | 1 |
Convey device | 3 |
Cutting device | 2 |
Sewing table | 1 |
Tension Device | 5 |
Accumulator | 2 |
Redirection steel roller | 9 |
Degrease pool | 3 |
Brushing roller | 2 |
Water washing pool | 5 |
Neutralizing pool | 1 |
Squeeze roller | 14 |
Air drying device | 1 |
Roller-coating chromizing coater | 1 |
Chromizing drying oven | 1 |
Coater | 1 |
Curing oven | 1 |
Air cooling system | 3 |
Coil machine | 1 |
Coil discharging device | 1 |
CPC | 5 |
EPC | 1 |
Hydraulic system | 3 |
Electrical system | 1 |
Steel frame | 1 |
Lift | 1 |
4.Water and power consumption of coating line
Total power consumption: | 830KW |
Compressed air: | Min5.5bar, 1Nm3/min, actual consumption 0.5Nm3/min |
Water: | Deionized water, supply quantity is about 4T/h |
Heating fuel: | LPG or LNG |
LPG consumption: | 0.2 CBM/min |
LNG consumption: | 0.4 CBM/min |
5. The coating line design and manufacture leads 100 days, installation and testing leads 60 days.
6.Trade terms: FOB, CIF are available
7.Payment terms: T/T, D/P, LC are acceptable
8. Packing style: Wooden pallet
9. Transportation: by sea
